Crescent Parts | Malco Products

Filter

Search Within Brand

: Awls & Scribes (8)
Bits (6)
Bits & Blades (3)
Breaks (2)
Caulk Guns (1)
Crimpers (3)
Crimping & Stripping (1)
Dampers (7)
Dividers (2)
Duct Holders (1)
: 45 Degree (1)
: #2 (2)
: 1/4 Inch (2)
3/16 Inch (1)
5/16 Inch (1)
7/32 Inch (1)
: 3-1/2 Inch (1)
3-3/4 Inch (1)
4 Inch (2)
5 Inch (1)
6 Inch (1)
: Carbon Alloy Steel (1)
Cutlery Grade Steel (1)
High Carbon Alloy Tool Steel (2)
: #4-40 TPI/#5-40 TPI/#6-32 TPI (Bolt), #8-32 TPI/#10-32 TPI/#10-24 TPI (Cutting), 10 to 22 Gauge (Crimping/Stripping) (1)
0.024 Inch (24 Gauge Mild Steel) (3)
0.035 Inch (Aluminum), 0.023 Inch (Copper), 0.018 Inch (26 Gauge Stainless Steel), 0.028 Inch (24 Gauge Galvanized Steel), 0.024 Inch (24 Gauge Mild Steel) (4)
0.054 Inch (Aluminum), 0.04 Inch (20 Gauge Galvanized Steel), 0.036 Inch (20 Gauge Mild Steel) (1)
20 Pound Work Load (1)
24 Gauge (Galvanized Steel) (2)
24 Gauge Galvanized/Mild Steel (3)
24 Gauge Stainless Steel, 22 Gauge Galvanized Steel, 22 Gauge Mild Steel (1)
26 Gauge (Sheet Metal) (1)
: 1/10 Gallon (1)
: Rubber Clad (1)
: Black Oxide (4)
: Black (Marking) (1)
Black Baked Enamel (Body), Gray (Cushion Grip) (1)
Nickel Chrome (Body) (1)
: Double End (1)
Double End, Split Point (3)
: Aluminum, Copper, Galvanized Steel, Stainless Steel, Mild Steel (6)
Aluminum, Copper, Stainless Steel, Galvanized Steel, Mild Steel (5)
Aluminum, Copper, Stainless Steel, Galvanized Steel, Mild Steel, Vinyl (1)
Vinyl, Aluminum, Copper, Stainless Steel, Galvanized Steel, Mild Steel (1)
: 0.055 Inch (Vinyl), 0.035 Inch (Aluminum), 0.023 Inch (Copper), 0.018 Inch (26 Gauge Stainless Steel), 0.028 Inch (24 Gauge Galvanized Steel), 0.024 Inch (24 Gauge Mild Steel) (2)
0.062 Inch (Aluminum), 0.054 Inch (Copper), 0.036 Inch (20 Gauge Stainless Steel), 0.052 Inch (18 Gauge Galvanized Steel), 0.048 (18 Gauge Mild Steel) (3)
0.062 Inch (Aluminum), 0.054 Inch (Copper), 0.036 Inch (20 Gauge Stainless Steel), 0.052 Inch (18 Gauge Galvanized Steel), 0.048 Inch (18 Gauge Mild Steel) (2)
0.062 Inch (Aluminum), 0.054 Inch (Copper/Galvanized Steel), 0.038 Inch (Stainless Steel), 0.048 Inch (Mild Steel) (6)
: 1-1/16 Inch (1)
1-1/2 Inch (1)
1-1/4 Inch (4)
1-3/8 Inch (5)
3-1/4 Inch (2)
: 1/4 Inch (1)
: Left (3)
Left, Right (1)
Left/Right/Straight (1)
Notching and Trimming (1)
Right (3)
Straight, Pattern (1)
Straight/Left (1)
Straight/Left/Right (1)
Straight/Right (1)
: Analog (1)
: #2 (6)
#3 (5)
: #30 (1)
1/4 Inch (2)
1/8 Inch (1)
3/16 Inch (1)
: Hex (2)
: 1/4 Inch (6)
5/16 Inch (2)
: Hex (7)
: 1/4 Inch (1)
3/8 Inch (1)
5/16 Inch (2)
: Hex (16)
Hex, Slotted (7)
Slotted (1)
Slotted Hex (2)
Slotted, Hex (5)
: Hex (2)
: 5 Inch Diameter (1)
6 Inch Diameter (2)
7 Inch Diameter (1)
8 Inch Diameter (1)
: 3/4 Inch (1)
7/8 Inch (1)
: Black Oxide Satin (1)
Blue (1)
Bright Zinc Plated (5)
Clear (1)
Corrosion Resistant Galvanized (1)
Dark Gray Frame (1)
Fully Polished Head (1)
Nickel Plated (2)
Polished (8)
Polished (Head) (1)
: 1/2 Inch (4)
: Twist (4)
: Red (3)
Yellow (2)
: ABS Plastic (1)
Leather Grip (1)
Molded-On Vinyl Grip (1)
Nickel Chrome Plated Steel (1)
Nylon (1)
Plastic (1)
Vinyl Cushioned (1)
: Euro Styled Ergonomic, Thumb Operated, Green (2)
Euro Styled Ergonomic, Thumb Operated, Red (3)
Euro Styled Ergonomic, Thumb Operated, Yellow (1)
Green (2)
Red (2)
Yellow (1)
: 0.25 Inch (3)
: 1/4 Inch (4)
: Hex Washer (25)
Hex Washer, Type A, Single Thread (1)
: 0.032 Inch (2)
0.32 Inch (1)
: Handle (1)
Pivot Pin Set (1)
Drill Clamp (1)
Wing Nut (1)
Blade (1)
Sleeve (1)
Cutter Bit (1)
Ratcheting Handle (1)
Pilot Drill Bit (1)
Leg Kit (1)
: 3/16 Inch, 7/32 Inch, 1/4 Inch, 5/16 Inch, 3/8 Inch (1)
3/32 Inch, 7/64 Inch, 1/8 Inch, 9/64 Inch, 5/32 Inch, 3/16 Inch, 7/32 Inch, 1/4 Inch (1)
5/64 Inch, 3/32 Inch, 7/64 Inch, 1/8 Inch, 9/64 Inch, 5/32 Inch, 3/16 Inch, 7/32 Inch, 1/4 Inch (1)
5/64, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4 Inch (1)
5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4 Inch (1)
: 3/8 Inch (2)
48 Inch (1)
2 Inch (3)
1 Inch (4)
1/2 Inch (8)
3/4 Inch (8)
30 Foot (1)
1-1/2 Inch (1)
5 Inch (1)
9 Inch (2)
: 1 Inch (1)
: #80 (1)
: #61 (1)
: #10 (12)
#6 (2)
#7 (1)
#8 (11)
: 20 (1)
: 1 (1)
: 1 (2)
: 12 (1)
5 (1)
7 (1)
8 (1)
9 (2)
: 1 (1)
: 2 (4)
: 1 (1)
3 (1)
: 1 Inch (1)
1-15/16 Inch (1)
10 Inch (7)
10-1/2 Inch (3)
11 Inch (2)
11-3/4 Inch (1)
12 Inch (1)
13-1/2 Inch (1)
14 Inch (2)
2 Inch (4)
: 2-1/2 Inch (1)
3/16 Inch Diameter x 2-3/16 Inch Length (1)
5/16 Inch Diameter x 2-1/8 Inch Length (1)
6-3/8 Inch Length (1)
: Case (1)
Handy Reusable Case (2)
Zinc Plated Case (1)
: 118 Degree (1)
120 Degree (1)
135 Degree (3)
: #18 (1)
#24 (1)
Dual Edge (1)
Sharp (1)
: Brazed, Tempered (1)
Forged, Hardened and Tempered (2)
Hardened (4)
Hardened (Upper Jaw), Forged (Lower Jaw) (2)
Hardened Forged Jaw (3)
Hardened, Forged (2)
Heat Treated (25)
Molded (1)
Polished (1)
: 0.125 to 0.135 Inch (3)
: (3) 1/4 Inch, (3) 5/16 Inch, (3) 3/8 Inch Driver Shaft (Short, Medium, Long), (3) Handle (Stubby, Full Grip, Full Grip Ratcheting Style) (1)
(5) Piece Set (1)
(7) 12 Inch Long Set (1)
(8) 9 Inch Set (1)
(9) 6 Inch Long Set (1)
(9) Inch Set (1)
1/4 Inch, 5/16 Inch, 3/8 Inch, 7/16 Inch Hex Nut Driver (1)
: 0.125 Inch (3)
: 0.232 Inch (2)
0.357 Inch (1)
2-1/4 Inch (1)
6-7/8 Inch (1)
: 1/4 Inch (1)
1/4 Inch Diameter (1)
: Flat (1)
: 100 per Pack (5)
1000 per Tub (1)
500 per Tub (2)
: 1/4 Inch (1)
5/16 Inch (4)
5/16 Inch, 3/8 Inch (2)
: 6-Point (2)
: Yellow (1)
: 16 (7)
18 (4)
: Inch (1)
: Foot (1)
: HC1, HC2 (1)
MB48A (1)
TS1 (1)
: Magnetic Hex/Hollow Hex/Phillips Chuck Driver (1)
2 Inch Foam Board (1)
Duct Damper (2)
Sheet Metal Hole Cutter (2)
Refrigeration Ratchet Wrench (2)
Hole Saw Arbor (1)
: HC1/HC2 (1)
RRW3/RRW4/RRW5 (2)
D4AST/D5AST/D6AST/D6HTAST/D7HTAST/D6HT100 (1)
: Hole-in-One (1)
: HSK (1)
: Cord and Cordless Drill (1)
Mini-Brake (1)
Sheet Metal Hole Cutter (1)
Turbo Shear (1)
: Portable (1)
: 1 Inch (2)
: Yes (1)