Part #AUD2B080A9V3VB
MFG #AUD2B080A9V3VB
Product Description
17-1/2" x 28-3/8" x 40", 80000 BTU/Hr, 3 Ton, 115 VAC 60 Hz 1-Phase, 7.7 A FLA, 1/2 HP, 80% AFUE, 2-Stage, Variable Speed, Upflow/Horizontal, Natural/Liquid Propane Gas Furnace

Part #AUD2B080A9V3VB
MFG #AUD2B080A9V3VB
Product Description
17-1/2" x 28-3/8" x 40", 80000 BTU/Hr, 3 Ton, 115 VAC 60 Hz 1-Phase, 7.7 A FLA, 1/2 HP, 80% AFUE, 2-Stage, Variable Speed, Upflow/Horizontal, Natural/Liquid Propane Gas Furnace
- Safe Operation the Integrated System Control has Solid State Devices, Which Continuously Monitor for Presence of Flame, When the System is in the Heating Mode of Operation; Dual Solenoid Combination Gas Valve and Regulator Provide Extra Safety; Quick-Heating Durable, Cycle Tested, Heavy Gauge Aluminized Steel Heat Exchanger Quickly Transfers Heat to Provide Warm Conditioned Air to the Structure; Low Energy Power Vent Blower, To Increase Efficiency and Provide Discharge of Gas Fumes to the Outside, Allows Common Venting with Hot Water Heater; Multi-Port, In-Shot Burners will Give Years of Quiet and Efficient Service; Integrated System Control; High Efficiency Gas Furnaces Employ a Hot Surface Ignition System, Which Eliminates the Waste of a Constantly Burning Pilot; Central Heating Furnace Designs are Certified to ANSI Z21.47/CSA 2.3 for Both Natural and LP Gas; Limit Setting and Rating Data Were Established and Approved Under Standard Rating Conditions Using American National Standards Institute Standards
- Gas Furnace; Type 2-Stage, Variable Speed, Upflow/Horizontal; Btu per Hour 52000 (Input)/41600 (Output) 1-Stage, 80000 (Input)/64000 (Output) 2-Stage; Capacity 1110 to 1415 CFM at 0.1 Inch WG (Heating), 1040 to 1340 CFM at 0.1 Inch WG (Cooling); Size 17-1/2 Inch Width x 28-3/8 Inch Depth x 40 Inch Height; Vent Size 4 Inch Diameter; Inclusion/Features Direct Drive Blower, High Velocity Filter, Centrifugal Combustion Fan, Multi-Port Inshot Burner, Hot Surface Ignition Pilot Safety Device, 20 Gauge Aluminized Steel Heat Exchanger, Heavy Gauge Steel/Wrap Around Cabinet; Voltage Rating 115 Volt AC 60 Hertz 1-Phase; Current Rating 7.7 Amp FLA (Blower Drive), 0.7/0.4 Amp FLA (Combustion Fan), 15 Amp (MOP); Motor Power Rating 1/2 HP (Blower Drive), 1/100 HP (Combustion Fan); Nominal Cooling Capacity 3 Ton; Fuel Type Natural/Liquid Propane Gas; Blower Dimension 10 Inch Diameter x 7 Inch Width; Motor Speed Rating 2543/1727 RPM; Number of Burner 4; Pipe Connection Size 1/2 Inch; AFUE Rating 80 Percent (Premium); Temperature Rating 30 to 60 Deg F; Applicable Standard ETL (Canada and US), ANSI Z21.47/CSA 2.3
- Brand
American Standard Heating & Air Conditioning
BTU Input80k
Capacity1110 to 1415 CFM at 0.1 Inch WG (Heating), 1040 to 1340 CFM at 0.1 Inch WG (Cooling)
OrientationMulti-Position
Size17-1/2 Inch Width x 28-3/8 Inch Depth x 40 Inch Height
Type2-Stage, Variable Speed, Upflow/Horizontal
Vent Size4 Inch Diameter